Compare

Fieldhand vs Raspberry Pi Connect

Connect is the built-in choice for a Pi on Raspberry Pi OS; Fieldhand covers any Linux device and adds alerts and fleet commands.

Raspberry Pi Connect is Raspberry Pi's own service: a shell and screen sharing in the browser, through NAT and CGNAT. It ships with Raspberry Pi OS Bookworm and later, it is free for personal use, and it connects your browser straight to the Pi when it can. If your devices are Pis on Raspberry Pi OS and a shell is all you need, use it.

Fieldhand runs on any Linux device: other boards, Debian, Ubuntu, Alpine, OpenWrt, Yocto. It also watches the fleet: offline, disk and heat alerts, and commands on many devices in waves. Facts below are from raspberrypi.com in October 2026; check there for current terms.

FieldhandRaspberry Pi Connect
Runs onAny Linux: arm64, armv7, armv6, x86Raspberry Pi OS Bookworm or later
Free5 devices, whole teamPersonal use, one account
Paid$1.50 per active device a month$0.50 per device a month, organisations
Browser shellYesYes
ScreenWayland, X11 or the framebufferWayland only
Offline, disk and heat alertsEvery planNot in its docs
Command on many devicesEvery plan, in wavesRemote update artefacts, organisations
Any TCP port to your laptopfh forward, fh ssh, VS Code RemoteNot in its docs
Agent sourceOpen, Apache-2.0Check their site

Which one

  • Pis on Raspberry Pi OS, and a shell or screen is the whole job: Connect, it's already installed.
  • Mixed hardware or distros, or you need to know when a device drops: Fieldhand. Billing has the details.

Something wrong or missing on this page? Tell us.